While the timing information is not as accurate as that of alsa or sndio, it is often impractical to remove or disable PulseAudio. Alternatively, Shairport Sync works well with PulseAudio, a widely used sound server found on many desktop Linuxes. In that case, the pa backend can be used. An older backend for PulseAudio called pulse does not support synchronisation and is deprecated.
If you wish to have Shairport Sync start automatically when your system boots, you need to figure out what so-called “init system” your system is using. (If you are using Shairport Sync with PulseAudio, as installed in many desktop systems, this section doesn’t apply.
FlexGet is a multipurpose automation tool for content like torrents, nzbs, podcasts, comics, series, movies, etc. It can use different kinds of sources like RSS-feeds, html pages, csv files, search engines and there are even plugins for sites that do not provide any kind of useful feeds.
The final component of interest onboard is the micro-USB port. This is not used for data or connecting to your computer but rather as the power for the Raspberry Pi. The Raspberry Pi used very little power and 5V that USB provides is enough to power it as long as you aren’t using any addition devices plugged into the Pi that use a lot of power.
It comes with phpMemcachedAdmin, a graphic stand-alone administration for memcached to monitor and debug purpose. Free & open source, high-performance, distributed memory object caching system, generic in nature, but intended for use in speeding up dynamic web applications by alleviating database load.
Name = “Your Airport Server Name”;
drift = 352;
volume_range_db = 30;
run_this_before_playback_begins = “/usr/bin/amixer cset numid=3 1”;
run_this_after_playback_ends = “/usr/bin/amixer cset numid=3 0”;
wait_for_completion = “yes”;
output_device = “hw:0”;
mixer_control_name = “PCM”;.
Each row in the table will be a chat message that was sent to the service with the name of the user, the message, and a unique row id. Run the following command to start up MySQL and login as root:. This is the database and table that will hold the message information. With everything installed, it remains for you to set up the database and a table within the database to store the information.
AirPlay audio is output from the 3. This is tested and working on a Raspberry Pi 3 running OSMC (2016-10) and iOS 10 devices. 5mm jack on the Raspberry Pi, which can then be connected to an external speaker (I use the aux input on an old Bose SoundDock).
) No backend is specified here, so it will default to the alsa backend if more than one back end has been compiled. To route the output to PulseAudio, add:. (Remember, anything preceded by // is a comment and will have no effect on the setting of Shairport Sync.
Suppose you wanted to set the name of the service to Front Room, give the service the password secret and use libsoxr interpolation, then you should do the following:. For instance, there is a general group within which you can use the name tag to set the service name. Settings in the configuration file are grouped.
Set up Wowza Transcoder NVIDIA NVENC accelerated encoding on Debian * Configure NVIDIA. Use Apple TV with Wowza Media Server (AirPlay) * Use Enseo Cassini set-top box with Wowza. Configure Wowza media server to use proxy server to communicate with license server.
You’ll also need a column called id that is simply an integer that increments each time a new row in created/inserted. This is going to be a chat app, so you want the table to contain columns for the name of the person who sent the message and the message itself. This ensures you have something unique by which to identify each row. Now that you’ve created a database and set it as the active database, you need to create a table to actually store the information.