Note: If you see PowerShell instead of Command Prompt on the Power Users menu, that’s a switch that came about with the Creators Update for Windows 10. It’s very easy to switch back to showing the Command Prompt on the Power Users menu if you want, or you can give PowerShell a try. You can do pretty much everything in PowerShell that you can do in Command Prompt, plus a lot of other useful things.
By routing via fwmark, and using the –mark option to ipchains or the MARK target and –set-mark option in iptables , you can perform conditional routing based on characteristics and contents of the packet.  This should not lead you into believing it cannot be done. This is linux after all.
I have nothing to say about nexthop yet, because I have never used it, this goes for equalize and onlink as well. If anybody has some examples s/he would like to contribute, I’d love to hear.
Since the kernel refers to the routing cache before fetching a new route from the routing tables, ip route flush cache empties the cache of any data. Next, it traverses the routing policy database and routing tables. Now when the kernel goes to the routing cache to locate the best route to a destination, it finds the cache empty. When the kernel finds the route, it will enter the newly fetched destination into the routing cache.
” . Denker, you should not forget to use ip route flush cache after you have changed the routing tables; “otherwise changes will take effect only after some maddeningly irreproducible delay. 2, “Displaying the routing cache with ip route show cache ”, we looked at the contents of the routing cache, a hash table in the kernel which contains recently used routes. To quote John S.
Naturally, this is not a problem if you are connected to the machine via a serial, modem, console, or other out of band connection. Note that you should exercise caution when using ip route flush table because you can easily destroy your own route to the machine by specifying the main routing table or a routing table that is used to send packets to your workstation.
Other interesting examples of this command involve the use of prohibit and from. If you know a netblock that hosts a service you are not interested in allowing your users to access, this is an effective way to block the outbound connection attempts. Use of the prohibit will cause the router to report that the requested destination is unreachable.
The syntax is substantially similar to the syntax above, but uses a CIDR network address instead of a single IP. Not only can iproute2 support network address translation for single IPs, but also for entire network ranges.
Org> and then modified by Johannes Stille and Linus Torvalds for pl15. X” to be gatewayed through the former route to the SLIP interface. Author Currently maintained by Phil Blundell
This gives us a good deal of information about the IP networks to which the machine is directly connected, and an inside look into the way that the routing tables treat special addresses like broadcast addresses and locally configured addresses.
Operations include displaying routes or the routing cache, adding routes, deleting routes, modifying existing routes, and fetching a route and clearing an entire routing table or the . Another part of the iproute2 suite of tools for IP management, ip route provides management tools for manipulating any of the routing tables.
Параметр -p поддерживается в команде route только в операционных. При использовании данного параметра совместно с одной из команд (таких, как add.